How to resuming from a middle failed print - clogs nozzle

The place to discuss the M3-ID
Post Reply
Shirandm
Posts: 4
Joined: Fri Jan 20, 2017 8:02 am

How to resuming from a middle failed print - clogs nozzle

Post by Shirandm » Fri Feb 14, 2020 9:46 pm

Can anyone please explain how to resume a print from middle layer?,I have Makergear m3id re1, I find out the exact layer that my nozzle clogged ( Recently it has been happening too many times😡). The thing is that I don’t know what are the necessary starting script adjustment...to prevent the probe from crashing in to the part and to have the right Z0 leveling correct.....
Thanks in advance

jk42
Posts: 67
Joined: Mon Oct 09, 2017 5:19 pm

Re: How to resuming from a middle failed print - clogs nozzle

Post by jk42 » Wed Feb 19, 2020 4:03 pm

Have you contacted us here in support about this issue?
If not, please shoot us an email at support@makergear.com.
We'd be happy to assist you!
~Jason from MakerGear

Post Reply