M3-ID is a great hardware, but .....

The place to discuss the M3-ID
airscapes
Posts: 594
Joined: Wed Jan 31, 2018 11:36 pm

Re: M3-ID is a great hardware, but .....

Post by airscapes » Thu Mar 05, 2020 8:17 pm

assuming .35 nozzle
Print this and measure the height of the walls should be no more than 3mm and no less than 2.98
2 walls at .4 EW 3mm tall.stl
(1.64 KiB) Downloaded 658 times

Post Reply