WARNING: Firmware Unresponsive

Ask the MakerGear community for assistance...
Post Reply
KaiborgStudios
Posts: 59
Joined: Mon Mar 21, 2016 2:18 am

WARNING: Firmware Unresponsive

Post by KaiborgStudios » Sat May 15, 2021 1:54 am

Having this issue intermittently on one of my M2 Rev. E. It will pause the print , and sit there spitting out this error. Any ideas?

Thanks!
Cameron
Attachments
2021-05-14 17_33_06-Protogen Lower Head .600 two - Simplify3D (Licensed to Cameron DePiero).png

User avatar
ednisley
Posts: 1178
Joined: Fri Apr 11, 2014 5:34 pm
Location: Halfway up the Hudson
Contact:

Re: WARNING: Firmware Unresponsive

Post by ednisley » Sat May 15, 2021 2:01 pm

KaiborgStudios wrote:
Sat May 15, 2021 1:54 am
sit there spitting out this error
The place to look is just before the first occurrence of that error message, where you'll find another message suggesting what caused the firmware to stop responding.

This may require considerable scrolling and maybe enlarging the scroll buffer, but that's the only way to make progress.

KaiborgStudios
Posts: 59
Joined: Mon Mar 21, 2016 2:18 am

Re: WARNING: Firmware Unresponsive

Post by KaiborgStudios » Wed May 19, 2021 3:54 am

Can do! Once it happens again I'll snag that info.

Post Reply