Has anyone changed the fan in their power supply?
Re: Has anyone changed the fan in their power supply?
A hah!
I was using one of those nice looking 3 to 2 pin adapters that came with the 40mm fans..what I did not see under all the pretty heat shrink was that the +/- polarity was reversed from the original fan. I had thought if that were the case, it would simply run in reverse, but I was talking to one of the EE's where I work about it and he said they don't work like that (didn't get in depth as to the why's, but he was in the middle of something so I didn't want to take any more of his time ). Anyway I just swapped the pins around and I'm back in business!
I was using one of those nice looking 3 to 2 pin adapters that came with the 40mm fans..what I did not see under all the pretty heat shrink was that the +/- polarity was reversed from the original fan. I had thought if that were the case, it would simply run in reverse, but I was talking to one of the EE's where I work about it and he said they don't work like that (didn't get in depth as to the why's, but he was in the middle of something so I didn't want to take any more of his time ). Anyway I just swapped the pins around and I'm back in business!
2012 M2 V4-PTFE
Re: Has anyone changed the fan in their power supply?
You can't simply reverse the pins because inside the fan is an entire chip dedicated to detecting the fan's position and firing the next coil in sequence. The chip doesn't run on reverse voltages (and honestly I'm surprised it survived).Rara wrote:A hah!
I was using one of those nice looking 3 to 2 pin adapters that came with the 40mm fans..what I did not see under all the pretty heat shrink was that the +/- polarity was reversed from the original fan. I had thought if that were the case, it would simply run in reverse, but I was talking to one of the EE's where I work about it and he said they don't work like that (didn't get in depth as to the why's, but he was in the middle of something so I didn't want to take any more of his time ). Anyway I just swapped the pins around and I'm back in business!
Custom 3D printing for you or your business -- quote [at] pingring.org
Re: Has anyone changed the fan in their power supply?
Yikes! Christmas miracle, I suppose..
2012 M2 V4-PTFE
- willnewton
- Posts: 479
- Joined: Wed Apr 09, 2014 8:32 pm
Re: Has anyone changed the fan in their power supply?
start with this. http://www.thingiverse.com/thing:13680323dPrintingMD wrote:So far I've replaced the extruder, power supply, and electronics case with Noctua fans.
I am basically sitting around dreaming and hoping that some fellow maker will make a bracket for a V2 and a 40mm fan so I can replace the bed fan as well
The power supply fan swap for a Noctua 60mm is one of best you can make in terms of noise reduction. Simple swap too. I just left the front cover off the power supply for airflow. I've left my MG turned on for a month or longer with no issues.
I'm finally back to where I started two days ago!
A thread with some stuff in it I update every once in a while. viewtopic.php?f=8&t=9
See some of my stuff http://www.thingiverse.com/willnewton/favorites
A thread with some stuff in it I update every once in a while. viewtopic.php?f=8&t=9
See some of my stuff http://www.thingiverse.com/willnewton/favorites
Re: Has anyone changed the fan in their power supply?
Hi guys, i find the PSU fan to be the loudest in my system. This thread points out to quiet fans like Noctua's 60mm to be the way to go.
I have the 24v system, is the fan in the PSU 12v so i can fit the fan or is it 24v and need to look somewhere else?
Thanks!
I have the 24v system, is the fan in the PSU 12v so i can fit the fan or is it 24v and need to look somewhere else?
Thanks!
- willnewton
- Posts: 479
- Joined: Wed Apr 09, 2014 8:32 pm
Re: Has anyone changed the fan in their power supply?
yes, the supply has an internal 12v fan hookup. order the one from this link.
jdacal wrote:I changed all my fans, eerie silence now along with the stepper dampers that were recommended here.
Here's the fan links from Amazon in case someone wants to use them:
Power Supply fan (note that Noctua fan moves about 20% less air than the original if I recall correctly. I did not re-install the Makergear case on mine. Running nice and cool though AND quiet):
http://www.amazon.com/gp/product/B009NQ ... detailpage
40mm x 10mm fans:
http://www.amazon.com/gp/product/B009NQ ... detailpage
I'm finally back to where I started two days ago!
A thread with some stuff in it I update every once in a while. viewtopic.php?f=8&t=9
See some of my stuff http://www.thingiverse.com/willnewton/favorites
A thread with some stuff in it I update every once in a while. viewtopic.php?f=8&t=9
See some of my stuff http://www.thingiverse.com/willnewton/favorites
Re: Has anyone changed the fan in their power supply?
Thanks for the quick reply, Will.. fan orderedwillnewton wrote:yes, the supply has an internal 12v fan hookup.
Re: Has anyone changed the fan in their power supply?
The makergear m2 power supply board has a 2 pin connection. The 60mm and 40mm noctua fans has 3-pin connector. So you're going to need that 3-pin to 2-pin adapter. The problem is that the 2 pin on the supply board is reverse the +/- polarity of that of the adapter. To fix the problem, swap the pins on the 2-pin end of the adapter and the fan should work now.Rara wrote:A hah!
I was using one of those nice looking 3 to 2 pin adapters that came with the 40mm fans..what I did not see under all the pretty heat shrink was that the +/- polarity was reversed from the original fan. I had thought if that were the case, it would simply run in reverse, but I was talking to one of the EE's where I work about it and he said they don't work like that (didn't get in depth as to the why's, but he was in the middle of something so I didn't want to take any more of his time ). Anyway I just swapped the pins around and I'm back in business!
To swap: Find a way to pull the wires out of the adapter socket and put it back in reverse socket from before. For me, I just push down the tap and pull, then swap them and push it back in.
Here's video on how to take out wire from socket connector: https://www.youtube.com/watch?v=S9xeg_3eREc
Re: Has anyone changed the fan in their power supply?
I realize that this is an old thread, but for some reason my power supply fan seemed a bit more obnoxious than usual today. I suspect it's because other common noise sources in my shop were quiet today, but it got me thinking...
The Noctura fans mentioned in this thread were rated at 20% less air flow than the stock fan, but that was from three years ago. I'm wondering, has anyone has found a quiet fan that supplies as much air as the original?
I've got the Nocrura part number, but I was also hoping someone has the make & model of the stock power supply fan so I can look up the specs.
Thanks!
The Noctura fans mentioned in this thread were rated at 20% less air flow than the stock fan, but that was from three years ago. I'm wondering, has anyone has found a quiet fan that supplies as much air as the original?
I've got the Nocrura part number, but I was also hoping someone has the make & model of the stock power supply fan so I can look up the specs.
Thanks!
Re: Has anyone changed the fan in their power supply?
I can't help you with the specs but I've had the Noctura's in all 3 of my power supplies and I've never had an issue.... well I have to assume they are running because they sure can't be heard.
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com
See my projects at https://www.theneverendingprojectslist.com