Ultra One (U1) USB Stick Not Accessible
Posted: Fri Jan 17, 2020 7:18 pm
Hello,
The touch interface for the U1 appears to give the option to load files from USB, so I would guess that I should be able to stick a flash drive into the USB port on the side of the machine and then bring up a gcode files from the "Load File" menu item.
It never recognizes that there are any files on a stick. I've tried formatting the stick as ext4, FAT, and NTFS with the same result. This is all with only a single gcode file on the stick. I've also tried capitalizing the .gcode extension (e.g. "filename.GCODE").
Question mark.
The touch interface for the U1 appears to give the option to load files from USB, so I would guess that I should be able to stick a flash drive into the USB port on the side of the machine and then bring up a gcode files from the "Load File" menu item.
It never recognizes that there are any files on a stick. I've tried formatting the stick as ext4, FAT, and NTFS with the same result. This is all with only a single gcode file on the stick. I've also tried capitalizing the .gcode extension (e.g. "filename.GCODE").
Question mark.