Glass Bed
Posted: Tue Dec 15, 2020 8:18 am
Hello Everyone, New to the forum and I'm looking forward to your help
So my company has purchased a "Makergear Ultra one". Unfortunately both me and my colleague have no previous experience with 3D printing but are willing to learn. We decide that here is the best place to ask questions.
First question, the glass beds. Probably an obvious one but cant find the answer online, we have received our glass beds but with a protective plastic film on them. I'm saying to peel them off but my colleague is hesitant. What is the correct approach for this.
Second question is regarding pausing and resuming mid print. Once again something that might seem obvious but not clearly documented for this machine. So we can do the basic of pausing the machine, retracting the hotend from the print and the resume. What we wish to know is how to handle for example a 12 hour print. How can we pause, move the hotend, Powerdown the machine and then return the next day and resume our print.
once again apologies for basic questions but we all started somewhere. Also the Information for the Ultraone online is very limited.
Thanks again
So my company has purchased a "Makergear Ultra one". Unfortunately both me and my colleague have no previous experience with 3D printing but are willing to learn. We decide that here is the best place to ask questions.
First question, the glass beds. Probably an obvious one but cant find the answer online, we have received our glass beds but with a protective plastic film on them. I'm saying to peel them off but my colleague is hesitant. What is the correct approach for this.
Second question is regarding pausing and resuming mid print. Once again something that might seem obvious but not clearly documented for this machine. So we can do the basic of pausing the machine, retracting the hotend from the print and the resume. What we wish to know is how to handle for example a 12 hour print. How can we pause, move the hotend, Powerdown the machine and then return the next day and resume our print.
once again apologies for basic questions but we all started somewhere. Also the Information for the Ultraone online is very limited.
Thanks again