M3 ID: Octoprint slicer dead after software upgrade

Have questions or comments about Simplify3D, Slic3r, Cura, Reptier, etc? Or wondering about which CAD software to use...discuss it here...
Post Reply
hdlbq
Posts: 9
Joined: Sun Feb 03, 2019 7:05 pm

M3 ID: Octoprint slicer dead after software upgrade

Post by hdlbq » Sat Aug 14, 2021 5:34 pm

Hi,
I recently updated my octoprint plugins. I know, it was a bad idea :-).
Previously, I was a happy user of the octoprint curaEngine slicer. I prefer it to S3D for very simple objects, and for objects that require a raft. S3D tends to produce rafts difficult (nearly impossible) to remove.
But it seems to vanished during the upgrade: if I select "slicer" in the right top drop-down menu, the slicer's window remains empty with something like a progression bar (actually a cube), but nothing else.

My plug-in configuration has not been changed (/usr/local/bin/cura_engine).
I tried to reinstall the plugin (with the CuraEngine Legacy version), then to rebuild the curaEgine itself, without success.

Thanks for your help

ibash
Posts: 9
Joined: Wed Sep 08, 2021 8:37 am

Re: M3 ID: Octoprint slicer dead after software upgrade

Post by ibash » Thu Sep 23, 2021 7:54 am

Can you post your octoprint log files? (post the ones from the octoprint settings panel). Happy to look it over!

Post Reply