Octoprint No serial port
Posted: Wed Jun 15, 2016 3:54 am
Ok octoprint users....
I need a hand. I just got my pi, its up on the network but it doesn't show the serial port of the printer in the web interface.
Here is the dump from lsusb
Bus 001 Device 006: ID 046d:0825 Logitech, Inc. Webcam C270
Bus 001 Device 005: ID 27b1:0001 ##I think this one is the printer##
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
This is the output from dmesg when i unplug and re-plug in the printer.
1113.009064] usb 1-1.3: USB disconnect, device number 5
[ 1120.160531] usb 1-1.3: new full-speed USB device number 7 using dwc_otg
[ 1120.274861] usb 1-1.3: New USB device found, idVendor=27b1, idProduct=0001
[ 1120.274882] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 1120.274895] usb 1-1.3: Product: RAMBo
[ 1120.274907] usb 1-1.3: Manufacturer: UltiMachine (ultimachine.com)
Any ideas?
I need a hand. I just got my pi, its up on the network but it doesn't show the serial port of the printer in the web interface.
Here is the dump from lsusb
Bus 001 Device 006: ID 046d:0825 Logitech, Inc. Webcam C270
Bus 001 Device 005: ID 27b1:0001 ##I think this one is the printer##
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
This is the output from dmesg when i unplug and re-plug in the printer.
1113.009064] usb 1-1.3: USB disconnect, device number 5
[ 1120.160531] usb 1-1.3: new full-speed USB device number 7 using dwc_otg
[ 1120.274861] usb 1-1.3: New USB device found, idVendor=27b1, idProduct=0001
[ 1120.274882] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 1120.274895] usb 1-1.3: Product: RAMBo
[ 1120.274907] usb 1-1.3: Manufacturer: UltiMachine (ultimachine.com)
Any ideas?