ENCLOSURE TEMPS?
ENCLOSURE TEMPS?
My question is what kind of temps should an enclosure run at? I'm running ABS and just with the heated bed at 110° and it got up to about 116°F inside after about an hour.
Also will I have to worry about the printers electronics at this temp? I did do a 2 hour print and I noticed some bed temp spike that looked like it shut off a few times during that time. (I also foolishly melted my PLA camera mount too ) Is there a max temp a need to stay under? I can add a temp controller/fan if so....
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com
See my projects at https://www.theneverendingprojectslist.com