AC powered bed heater

The place to discuss your hardware and software/firmware modifications...
Post Reply
Posts: 495
Joined: Wed Jan 31, 2018 11:36 pm

AC powered bed heater

Post by airscapes » Mon Sep 30, 2019 8:20 pm

Anyone ever update the M2 heated bed to use an AC powered heater? This thing is really painful waiting for it to reach 110C with the stock DC heater.

User avatar
Posts: 1178
Joined: Fri Apr 11, 2014 5:34 pm
Location: Halfway up the Hudson

Re: AC powered bed heater

Post by ednisley » Thu Oct 03, 2019 8:15 pm

airscapes wrote:
Mon Sep 30, 2019 8:20 pm
an AC powered heater
Imagine the excitement when a wire carrying line voltage frays and shorts to something else in the braided sheath!

Instead, use the RAMBo's MOSFET to control an off-board DC-DC solid state relay, rewire the heater to run from a (somewhat) higher voltage external power brick, and tune for minimum smoke. I have a hotrod M2 platform, but the principle applies: ... hermistor/ ... oah-powah/


When the wires fray, the result won't kill you.

Post Reply