First Print on new M3 Dual

Show off your prints!!!
Posts: 17
Joined: Sat Aug 26, 2017 5:02 pm

Re: First Print on new M3 Dual

Post by Explorer74 » Fri Sep 08, 2017 7:55 pm

I downloaded the .stl file for the Aztec Calendar from MyMiniFactory ... tone-43009. I designed the stand myself with Autodeck Fusion 360 (free)

Posts: 202
Joined: Tue Mar 08, 2016 9:09 pm

Re: First Print on new M3 Dual

Post by psd » Sat Oct 07, 2017 8:47 pm

the print quality looks excellent, what layer height did you use?

also anyone know if the M3 can now do clean prints with soluble support?
- peter,

innovative product designer and tinkerer

Posts: 67
Joined: Mon Oct 09, 2017 5:19 pm

Re: First Print on new M3 Dual

Post by jk42 » Tue Oct 10, 2017 8:04 pm

The M3ID excels at printing with different colors and with different support filaments. The two independent extruders really help keep the integrity of the print.We suggest using a prime pillar and ooze shield to get the most accurate prints possible. We have also provided some great articles and videos on the M3 Knowledge base on how configure the processes on your slicer. You can get there by using the Knowledge Base button in the MakerGear OctoPrint interface.
Also, there are now M3 and M3 profiles for Simplify3 available.

Posts: 2
Joined: Wed Mar 07, 2018 9:46 pm

Re: First Print on new M3 Dual

Post by TheGlowInTheDarkMan » Thu Mar 15, 2018 10:13 pm

jimc wrote:thats pretty cool. is it your design or did you download it from somewhere? you have the stl or a link?
IDK, but I found probably the same thing on Thingiverse here: 8-)

Post Reply