esun petg

The place to discuss filament...
sprior
Posts: 385
Joined: Thu Apr 10, 2014 8:37 pm

Re: esun petg

Post by sprior » Wed Nov 05, 2014 1:54 am

What the heck, I'll take a red and a blue 1.75mm.

User avatar
jimc
Posts: 2888
Joined: Wed Apr 09, 2014 11:30 pm
Location: mullica, nj
Contact:

Re: esun petg

Post by jimc » Wed Nov 05, 2014 1:58 am

ok at this point everyone that said they want some should send the email to william....... admin@intservo.com. just give your name, color choices and how many you want.

User avatar
jdacal
Posts: 466
Joined: Thu Jul 03, 2014 10:28 pm
Location: Florida
Contact:

Re: esun petg

Post by jdacal » Wed Nov 05, 2014 10:42 am

I sent him mine last night.
jdacal

live print feed: http://enctrading.com/printcam/
See me Crash and Burn in Real time!

intservo
Posts: 17
Joined: Sat Nov 01, 2014 4:19 pm

Re: esun petg

Post by intservo » Fri Nov 14, 2014 8:05 pm

I think I emailed back all interested. If I miss anybody, let me know. The air freight is departing on time. Thanks William

User avatar
jdacal
Posts: 466
Joined: Thu Jul 03, 2014 10:28 pm
Location: Florida
Contact:

Re: esun petg

Post by jdacal » Sun Nov 16, 2014 7:29 am

I got my order in, looking forward to trying it. Thanks for the discount William.
jdacal

live print feed: http://enctrading.com/printcam/
See me Crash and Burn in Real time!

User avatar
insta
Posts: 2007
Joined: Tue Sep 16, 2014 3:59 am

Re: esun petg

Post by insta » Thu Nov 20, 2014 11:18 pm

Mine should get here soon :D
Custom 3D printing for you or your business -- quote [at] pingring.org

User avatar
jimc
Posts: 2888
Joined: Wed Apr 09, 2014 11:30 pm
Location: mullica, nj
Contact:

Re: esun petg

Post by jimc » Fri Nov 21, 2014 12:18 am

1/2 of mine shipped as well so i should have it really soon. tomorrow maybe. i had one last sample piece of this left from makerfaire and i printed it last night. hopefully they didnt change the formula or anything because the sample i had is some really strong and great printing stuff.

MG_MLS
Posts: 19
Joined: Fri Aug 15, 2014 2:44 pm

Re: esun petg

Post by MG_MLS » Sat Nov 22, 2014 1:23 am

Part of mine arrives tomorrow. jimc, what setting have you found to work best so far? Thanks!

User avatar
jimc
Posts: 2888
Joined: Wed Apr 09, 2014 11:30 pm
Location: mullica, nj
Contact:

Re: esun petg

Post by jimc » Sat Nov 22, 2014 1:27 am

well so far my settings are very similar to abs BUT i use an e3d hot end which changes things a bit. my settings wont really work for the v3b. 245-250 with the bed at 70 is a good start. bed fan is on 60% at 2nd layer.

User avatar
Tim
Posts: 1205
Joined: Thu Apr 10, 2014 2:19 pm
Location: Poolesville, Maryland
Contact:

Re: esun petg

Post by Tim » Sat Nov 22, 2014 8:21 pm

My spools of translucent blue and translucent yellow petg from Intservo arrived about an hour ago.

I cranked everything up and started printing a twist vase design that should finish in about two to three hours. I wanted to do something technically simple, but with large flat surfaces that would show how good a surface finish the petg makes, and how good or bad the layer striping comes out.

First impressions: This filament does not have quite the near-perfect tolerance of the PLA that MakerGear sells, or of the PET+ I got from MadeSolid. However, I have not yet had any issues with with the extrusion, so while it looks visibly bumpy on the spool, it apperently is well within the tolerance that the M2 can handle.

So far, it's living up to its claim of being as easy as PLA. The translucent blue color is gorgeous, too. I'll post a picture or two when it's done.

Printing with more or less nominal settings in S3D. I am running it through the V4 extruder with the liner, temperature at 255 degrees C, base at 70 degrees C.

Post Reply